Stacks Image 10566
Light-Weight & Rugged
Stacks Image 10567
Color Display
Stacks Image 10568
User-Friendly Screens
Stacks Image 10569
Premium Features
Title

Page Under Construction.

Stacks Image 76
The New vLoc-5000 from VIVAX-METROTECH is in a class all by itself. Combining the features of the popular vLocPro series with features like Signal Select SIS pioneered with the legacy Metrotech i5000, makes this locator stand above all others for accuracy, affordability, and features. Signal Selection SIS, only available on the vLoc-5000; for the first time ever gives users the ability to know without doubt that the utility being located is the target. Combining the left/right centerline guidance with traditional peak and now with a distortion meter helps technicians paint the correct utility every time.

Under the hood the vLoc-5000 provides fast dual-core processor engine which gives the ability to locate using peak antennas, left/right guidance with null antennas, line orientation with compass antenna, distortion meter, automatic depth and current measurement and onboard Bluetooth and GPS for longitude and latitude, and display all the information instantaneous and simultaneously on a large Sharp TFT VGA color display.

When combined with the backing and support of the world-wide experienced design team of VIVAX-METROTECH, it is easy to see why the vLoc-5000 pushes the bench mark above and beyond all its competitors.
Enter the name for this tabbed section: vLoc-5000 Features
Enter the name for this tabbed section: Specifications
Standard Features:

  • Rugged ABS & carbon fiber construction for strength and light weight
  • Both Li-Ion Rechargeable Battery (40 hours) & Alkaline (12 hours)
  • Mini USB socket for data transfer/software updates
  • Built-In GPS for Time & Date Stamp and Latitude & Longitude for precise mapping
  • Signal Select (SIS) provides positive line ID
  • Line Orientation Compass (360 degrees)
  • Distortion Alert Meter - assists in recognizing signal bleed over
  • Bluetooth enabled for external GPS use
  • Locate information can be stored in locator and retrieved later w/MyLoctor2 App
  • Ultra Fast Dual-Core processor engine for fast, reliable, and accurate results
  • Color backlit TFT high visibility display provides a best in class user experience, night or day
  • Very simple intuitive menu configuration for easy customized set-up
  • Over 70 receiver frequencies for compatibility with other manufacturers (free-of-charge)
  • Multiple Antenna modes (peak, null, peak-arrows, broad peak, sonde)
  • Multiple Gain modes (manual & auto)
  • Sonde (512Hz/640Hz/8kHz/33kHz)
  • Automatic continuous depth or current measurement (selectable)
  • Fault-Find mode is standard
  • Very simple intuitive menu configuration for easy customized set-up
Enter the name for this tabbed section: Data Sheet
Enter the name for this tabbed section: Frequency List
All vLoc-5000 receivers are equipped with the frequencies listed below.
PASSIVE
Power 50 (50+150+250Hz)
Power 60 (60+180+300Hz)
Radio Mode (22.1kHz)
RF EUR (19.8kHz)
50Hz
60Hz
CP 100
CP 120
CATV (31,468kHz)
Stacks Image 3291
Passive
  • Sweeping for unknown utiities
  • Verifying locating marks
Typical Uses
  1. 60Hz - power cables or common bonded utilities, i.e., telephone, CATV, etc.
  2. RADIO - unknown buried cable & pipes
  3. CP 120 - cathodic protected pipelines
  4. CATV - some cable TV systems
FAULT FIND
6Hz / 8.19kHz - Low
6Hz / 8.19kHz - High
Stacks Image 3332
Fault Find
  • Sheath & Secondary fault locating
  • Simultaneously cable locates
  • Provides depth of cable fault
Typical Uses
  1. POWER - secondary fault locating
  2. TELEPHONE - sheath fault locating
  3. FIBER OPTIC - sheath damage/moisture entry point
  4. locating stub-outs
LOW
64Hz
75Hz
98Hz (PDM/PCM)
128Hz (PDM/PCM)
163Hz
208Hz
220Hz
256Hz
SD-USA (256Hz/512Hz)*
273Hz
280Hz
320Hz
SD-EUR (320Hz/640Hz)*
340Hz
380Hz
400Hz
440Hz
460Hz
480Hz
484Hz
491Hz
512Hz
560Hz
577Hz
604Hz
624Hz
640Hz
680Hz
760Hz
800Hz
815Hz
920Hz
968Hz
982Hz (vLoc-9800)
1.02kHz
1.03kHz
1.09kHz
1.17Hz
1.45kHz
2.0kHz

*SD - Signal Direction
SD is optional for vLocPro2
SD is standard on vLocML
Stacks Image 3370
Low Frequency
  • Direct Connection
  • Long Distance locating
  • Low Bleed-over
Typical Uses
  1. long distance fiber optic cable
  2. long distance coated pipelines
  3. congested locates
MEDIUM
8.01kHz
8.19kHz
8.44kHz
9.5kHz
9.82kHz (vLoc9800 / VM-850)
10kHz
12kHz
16.9kHz
22.5kHz
29.4kHz
32.8kHz
38.0kHz
Stacks Image 3415
Medium Frequency
  • Direct/Clamp/Induction
  • Most Cables & Pipes
  • Typically used most often
  • Good Signal Distance
  • Low to Medium Bleed-over
Typical Uses
  1. good for most locates
  2. power & telephone cables
  3. gas transmission & distribution
HIGH
65.5kHz
78.125kHz
78.132kHz
80.4kHz
82.3kHz
82.5kHz
83.1kHz (VM-810 / vLoc-9800)
89kHz
118kHz
121kHz
128kHz
131kHz
200kHz
Stacks Image 8635
High Frequency
  • Induction
  • Poor Grounding conditions
  • Short Signal Distance
  • High Bleed-over
Typical Uses
  1. water pipe & tracer wire
  2. "drop box" inductive
  3. open circuits
Enter the name for this tabbed section: Display
The vLoc-5000 features SIS (Signal Select). The SIS feature when used, synchronizes the transmitter and receiver to provide a direction indicator (+ or -) of the signal to be displayed on the color screen while locating. This information allows for a user to more easily determine if they are locating the correct target. This feature is used primarily for high value utilities in congested areas, running through crowded corridors, etc. SIS can be used in low/medium/high frequencies making the vLoc-5000 one of the most accurate line locators ever designed.
Stacks Image 10410
Stacks Image 10488
Signal Select (SIS) allows the target line to be positively identified by indicating a (+) Plus "positive" indication of locate.

When the (+) Plus is indicated, the user can be sure that they are locating the target utility.
Stacks Image 10558
When the Signal Select (SIS) displays a (-) Minus or negative, this indicates that the user has lost the initial target locate and is now locating the wrong utility. This feature alone can save thousands of dollars in miss locates and lost hours on the job site.
Stacks Image 10475
The Distortion Alert meter is constantly analyzing the quality of the locating signal and will display a red warning indication when it detects distortion in the electromagnetic field. Distortion is caused by adjacent or crossing utilities. If no color is indicated, then locate signal is good and marking accuracy can be assured.

This feature also provides the line orientation arrow, which indicates direction of the utility.
Stacks Image 10543
When signal distortion is detected the circle fills up with red color indicating that this particular area of the utility locate should be given proper attention to guarantee accuracy.

This feature is important in helping locate technicians identify areas of concern. It can be used to eliminate good locates and marks from requiring additional attention, and instead focus on other areas where additional attention is required, thus saving additional time on the job site.
Locating accuracy is guaranteed with the bargraph and numerical peak signal strength indication. The unique multi-color indication makes locating the exact peak a quick and easy task.

Note: Under extreme difficult conditions, the peak indication will always be the final overriding piece information when determining where to mark the utility.
Stacks Image 10477
Note: Under extreme difficult conditions, the peak indication will always be the final overriding piece information when determining where to mark the utility.
Stacks Image 10496
Left / Right indication is displayed with a green centerline indication. This feature aides with line locating accuracy. When the centerline matches the peak indication, the user is exactly above the utility. Using both peak and centerline indication guarantee user accuracy.

Note: If centerline appears inaccurate, and distortion is indicated (RED COLOR), then only the peak indication should be trusted. The combination of these tools help technicians and engineers maintain accurate locates, even under the most difficult conditions.
Enter the name for this tabbed section: Bluetooth/GPS
Every vLoc-5000 receiver is Bluetooth enabled and with built-in Global Positions Systems (GPS) system. Locate information and GPS data can be stored on locator simply pressing of the "i" button. External GPS receivers, such as Trimble GPS can then be used with GIS earth mapping overlay for accurate map grade utility surveys.
Stacks Image 10418
Every vLoc-5000 receiver is Bluetooth enabled. This allows the vLoc-5000 to easily be paired with eternal GPS devices.
Stacks Image 10427
Stacks Image 10430
The vLoc-5000 comes standard with built-in GPS receiver for time & date stamping and data logging of vital utility information, e.g., depth of pipe, latitude & longitude for Google mapping and GIS. However for extreme mapping, the vLoc-5000 can easily be paired with other GPS receivers and provide locate information the the GPS with a simple button press and transmitted wirelessly via built-in Bluetooth module.
Stacks Image 10450
Trimble Pro 6T
Stacks Image 10455
Enter the name for this tabbed section: Fault Locating
Every vLoc-5000 receiver come standard with cable fault locating capabilities. The optional A-Frame accessory is all that is needed for easy and accurate above ground locating of cable sheath to ground faults. Cable faults is a common failure in the Telecom and Power industry, and never before has there been a cable fault locator that simultaneously locates cable, locates faults, and provide instant depth of fault when found, all in a single pass, saving time and money.

This system can find major and minor failures associated with power and telephone outages, or pin holes due to minute electrolysis or cable defects. A built-in resistance measure mode in the transmitter provides an accurate resistance measurement of the faulted conductor, making diagnosing and fixing out-of-service circuits an easier and quicker task.
Stacks Image 10518
Stacks Image 10520
Enter the name for this tabbed section: Transmitter

10 - Watt

Stacks Image 10549
The Loc-10Tx high power transmitter is designed to provide customers the best choice when selecting and deciding on a professional locating system. The 10 watt is fully featured, and reliability and output performance unequaled by the competition.

Output Current: a maximum current output of 1.0 Amp (10 watts)
Output Voltage: 30V-50V RMS
Voltage Protection: up to 240 VAC (external fuse)
Batteries: 12 D-cell (or optional Rechargeable)
Induction: (3) Frequencies - 33kHz, 65kHz, 200kHz (other frequencies are available)
Clamp: 8kHz to 83kHz
Direct Connect: FF-High, FF-Low, SD-USA, SD-EUR, 256Hz, 440Hz, 484Hz, 491Hz, 512Hz, 640Hz, 982Hz, 8.19kHz, 8.44kHz, 9.5kHz, 9.82kHz, 32.8kHz, 38kHz, 65.5kHz, 78.1kHz, 82.5kHz, 83.1kHz, 89kHz, 131kHz, 200kHz
Multifrequency Mode: up to (2) frequencies

Includes: 10' lead set & ground stake.
Stacks Image 10555
Enter the name for this tabbed section: Accessories
Accessories can be a time saver when just the right tool for the job is needed. The right accessory can in some applications save hours of work. You will find that Vivax has the right accessory for almost every need.
Enter the name for this tabbed section: Carry Options
Stacks Image 10597
Carry Bag with Wheels
(4.02.000066)
Stacks Image 10600
Soft Carry Bag
(4.02.000064)
Stacks Image 10636
Hard Case
(2.204.01.00035)
Stacks Image 10639
Shoulder Bag (Receiver only)
(4.02.000065)
Stacks Image 10642
Transmitter Bag(s)
(4.02.000013-10w)
(4.02.000067-1w&5w)
Enter the name for this tabbed section: Signal Clamps
Stacks Image 10646

2" Signal Clamp
(1.200.03.00014)

The 2" clamp is used for smaller telephone cable applications, CATV, and fiber optic cables.

Stacks Image 10649

4" Signal Clamp
(1.200.03.00013)

The 4" clamp is often desired for telephone and some power applications.

Stacks Image 10654

5" Signal Clamp
(1.200.03.00005)

The 5" clamp is the new industry standard. It allows signal application on 4" and larger conduit. This is the most popular clamp selection for users primarily locating underground power cable.

Stacks Image 10657

18" Flexi-Clamp
(1.200.03.00006)

Flexi-Clamp is primarily used for aerial cables transitioning to underground under protected U-guard, making it nearly impossible for smaller clamps to be used. Also can be used to apply signal to large bunches of cables.

Stacks Image 10662
Clamp Adapter and Extension Pole
Enter the name for this tabbed section: A-Frame
Stacks Image 10694
An A-Frame accessory provides a plug-n-play approach to simple and easy conductor fault locating. An essential tool for any power provider. Constructed of Light-Weight Carbon Fiber.
Enter the name for this tabbed section: Remote Antenna
Stacks Image 10702
The Remote Antenna (USB) accessory is designed to locate the individual cable among the many bundles that can be present in some communication applications and for “Hot” cable identification for locating unmarked secondaries in power transformers, eliminating the need to shut down working power conductors when doing secondary fault locating or maintenance.

(2.204.02.00001)
Enter the name for this tabbed section: LPC Filter
Stacks Image 10708
LPC Separation Filter provide an easy and safe method of applying transmitter signals to “Live” power lines.

(1.200.09.00001)
Enter the name for this tabbed section: Rechargeable Batteries
Stacks Image 10716
Using the 10-Watt transmitter Rechargeable battery pack saves money and helps keep the environment green. These battery packs can be recharged hundreds of times and can last the equivalent of two (2) regular Alkaline change-outs. Kit includes wall charger.

(200-191-025-B)
Stacks Image 10719
The 5-Watt transmitter Rechargeable Battery Pack. Kit includes wall charger.

(2.205.02.00037)
Stacks Image 10722
The Li-Ion Rechargeable Battery Pack (Rx) replaces the alkaline battery tray in the vLocPro2 receiver. Included in vLocPro2.

(2.204.01.00039)
Stacks Image 10725

vLocPro2 Receiver
Vehicle 12VDC Charger

(2.204.01.00051)

Stacks Image 10728

vLoc-5Tx & vLoc-10Tx Transmitter
Mains AC Power Lead (Not Charger) - 30'

Stacks Image 10731

Transmitter Vehicle 12DC Power Lead
(Not a charger - provides alternate power to transmitter) - 30'

(2.200.04.00017)

Enter the name for this tabbed section: Leads
Stacks Image 10735
Connection Lead (red/black)

(200-301-003)
Stacks Image 10738
(Leads include holder)
Stacks Image 10741
Ground Extension reel (30-feet)

(2.200.04.00077) - 32'
(2.200.04.00078) - 98'
Stacks Image 10744
Ground Stake

(200-301-007)
Enter the name for this tabbed section: Sondes
Enter the name for this tabbed section: GPS
The vLocPro2 & vLocML2 can be connected to a mounted GPS such as a Holux or Trimble Pro XT & XH whereas the latitude & longitude is logged internally with locate information, such as depth of utility, frequency, current measurement of signal, etc.. These data logs are easily accessible for mapping with applications such as Google Earth, etc. using MyLocator2 application from Vivax-Metrotech. The vLoc2 series can also be used seamlessly with unmounted GPS receivers such as Trimble 6000 Geo-XH & XT receivers and others. Detailed locate information can easily be processed and utilized using UtiliMapper software from Tri-Global.
Stacks Image 10761
Plug-N-Play Bluetooth module can be customer installed into any vLocPro2/vLocML2/vLocDM2 receiver to provide reliable wireless communication to external devices, such as GPS receivers.
(2.204.01.00044)
Stacks Image 10764
Stacks Image 10768
The Holux GPS receiver can be connected using Bluetooth to the vLocPro2 and vLocDM2 for pipeline current defect mapping and plotting and utility mapping. Also requires Bluetooth module to be installed onto receiver.

(2.204.01.00012) - Includes GPS and Holder
Stacks Image 10771
Stacks Image 10775
Trimble GPS Systems
Stacks Image 10782
Tri-Global UtiliMapper Software
Enter the name for this tabbed section: Videos
Enter the name for this tabbed section: Videos
Enter the name for this tabbed section: Software - MyLocator2 App
MyLocator2 is a FREE desktop App that runs on your PC. Simply plug USB cable into your vLoc2 series locator and let the App do the rest. MyLocator2 automatically checks your current software and with a single click lets users update their locator with the latest firmware. MyLocator2 also allows users to select just the features you want displayed and lock-out access to other features that you want hidden. MyLocator2 also provides an intuitive built-in utility that allows for easy data download of any saved "locate logs", especially for GPS users or locators requiring time and date stamp or SUE firms building underground utility maps. The MyLocator2 App is FREE OF CHARGE and is available at Vivax-Metrotech.com.
Stacks Image 10808
Enter the name for this tabbed section: Android Phone App - VM MAP
VM MAP is a FREE App that runs on your Android smart phone allowing you to instantly integrate your vLocPro2 locating information with Google Maps.
Stacks Image 10816
Android App - VM MAP
Enter the name for this tabbed section: Screenshot 1
Stacks Image 10824
Enter the name for this tabbed section: Screenshot 2
Stacks Image 10827
Enter the name for this tabbed section: Screenshot 3
Stacks Image 10830
Enter the name for this tabbed section: Screenshot 4
Stacks Image 10835
Enter the name for this tabbed section: Screenshot 5
Stacks Image 10838

Error : You must not have any spaces in your Teleport Key
[TeleportMe4]

Stacks Image 6661
Let us know if you want to take advantage of our popular RECYCLE YOUR LOCATOR Trade-In program and we will give you a generous offer on your older experienced locating equipment.
Stacks Image 10844
Stacks Image 1377